A pinhole leak dripping inside a wall, corroded galvanized pipe finally giving out, or a slab leak that's been driving up the water bill for weeks — pipe failures range from a slow drip to a real flood. Our Ashville technicians repair copper, PEX, and galvanized systems alike.
Copper, PEX, CPVC, and galvanized steel repair are all within our Ashville technicians' regular scope of work.
We locate the exact leak point with detection equipment before opening any wall or slab.
An actively leaking pipe gets priority routing across Ashville to limit water damage.
You'll get a written price once the leak is located and the repair scope is clear.
These are the pipe issues we see most often across Ashville, AL.
We check nearby sections of pipe too, since one pinhole leak sometimes signals broader corrosion.
Soldered joint repairs and section replacements are handled to code, with proper flux and fitting technique.
Aging galvanized or copper systems can be converted to PEX, which resists corrosion and scale buildup better long-term.
Corroding galvanized pipe restricting water pressure gets replaced section by section or as a full re-pipe, depending on extent.
Electronic leak detection locates the exact point of a slab leak before any concrete is opened.
A pipe that froze and split gets repaired or replaced, along with recommendations to prevent a repeat freeze.
Active visible leaks get priority dispatch across Ashville.
A technician arrives with detection and repair equipment matched to your pipe material.
You'll know exactly what's being repaired and what it costs before we start.
We test the repair under normal water pressure before calling the job done, then back it in writing.
"Slab leak located with equipment before they cut into the floor. Kept the repair small." — Homeowner, Ashville
"Frozen pipe burst over a cold weekend, they repaired it and suggested insulation to prevent a repeat." — Ashville resident
"Soldered joint repair was clean work, no leaks since, and reasonably priced." — Ashville customer
We serve Ashville proper and nearby Ashville, AL communities for copper, PEX, and galvanized pipe repair.
Electronic and acoustic leak detection equipment pinpoints the location before any demolition starts.
It depends on how much corrosion is affecting water pressure and how much of the system is original.
PEX resists corrosion and scale better and is often faster to install; copper is more traditional and very durable when properly maintained.
Pricing is confirmed after the leak is found, before repair work starts.
Often yes — a single burst section can usually be spot-repaired rather than replacing the whole line.
We aim to minimize the opening required, though every slab leak is assessed individually.
Fast dispatch across Ashville, AL for active leaks.
Call +1-855-718-1500